Ready-To-Press Full-Color Custom Sublimation Transfers
PLEASE ALLOW 72 HOURS TO 1 WEEK FOR CUSTOM PRINTS
Apply with a heat press at low pressure. Irons are not recommended.
When pressing use a cover sheet such as butcher paper or parchment paper. Use a new sheet of paper for each transfer.
Apply to 100% Polyester garments for a vibrant look. 65% Polyester garments will produce a less vibrant, more vintage look. Sublimation transfers should not be applied to garments that are less than 65% polyester. Sublimation transfers cannot be applied to 100% cotton unless you are using WanderSubli.
Sublimation looks best on white fabric. Other colors may look more faded. Sublimation cannot be seen on dark or black fabrics.
Mousepads, coasters, and mugs must have a polyester coating for proper application.
The percentage of polyester is the percentage of color that will be applied from the transfer.
FULL SHEETS ARE AVAILABLE FOR GANG RUN ONLY. Please make sure your artwork is the exact size of the sheet and contains a 1/4" margin.
Set temperature to 400 degrees Fahrenheit.
Set timer to 60 seconds.
Set Pressure at medium.
Place the paper face down on garment.
Cover with a non-stick sheet.
Press at 400 degrees F for 60 seconds with medium pressure.
Remove paper immediately and peel hot.